Showing posts with label Soap. Show all posts
Showing posts with label Soap. Show all posts

Monday, May 23, 2016

Faboulous Body Butter

I don't know why I haven't tried making body butter before.  It's so easy!  It's a nice alternative to lotion.  If you are sensitive to certain ingredients, this is a great way to create a lotion to meet your needs without spending a fortune.  We made two different blends.  I need to give a little warning before we start.  This body butter will be preservative free.  You should try to use it up within 6 months of making it.  Also, a given container should be used by only one person.

Recipe #1 is on the left, lovely helper in the middle, Recipe #2 on the right

Body Butter Recipe #1
Yielded a softer, fluffier butter.  It resembles whipped shortening.
1/3 cup shea butter (I order mine from this site http://www.wholesalesuppliesplus.com/)
1/3 cup coconut oil (I prefer the raw or less refined version that give a coconutty smell)
1/3 cup olive oil (the lighter the better)
1/2 teaspoon vitamin e oil (or break open 10 capsules of vitamin e)
10 drops clove essential oil (or essential oil of your choice)

Body Butter Recipe #2
Yielded a firmer, richer butter.  It smells like chocolate!  We tried using lavender essential oil with it, but the chocolate smell of the cocoa butter covered it.
1/3 cup cocoa butter (I order mine from this site http://www.wholesalesuppliesplus.com/)
1/3 cup coconut oil (I prefer the raw or less refined version that give a coconutty smell)
1/3 cup olive oil (the lighter the better)
1/2 teaspoon vitamin e oil (or break open 10 capsules of vitamin e)
10 drops peppermint essential oil (or essential oil of your choice)

We followed the directions in this video from TheSquishyMonster.com  After the cocoa/shea butter, coconut oil, and olive oil were melted, we added the vitamin e and essential oils.  Then we whipped them with an electric mixer.  The stand type mixer worked better and faster, but a hand held mixer worked fine too.
https://www.youtube.com/watch?v=6nyt2t02qf8

Monday, November 2, 2015

Getting Soapy

On October 17 I did a little soap making demonstration for the Great Plains Church Women's Ministry.  I told them I'd leave directions on my blog.  So here it is! 

Before I start with any directions, I need to do a little safety warning.  We will use lye to convert the oils into soap molecules.  Lye needs to be treated with respect.  If it gets into your eyes, you might go blind.  Wear your safety goggles when handling lye.

Step 1: Collect your materials.
12-14 oz filtered water
7 oz lye
15 oz olive oil
15 oz coconut oil
15 oz vegetable shortening
3 oz cocoa butter
1-2 oz fragrance or essential oil
10 capsules vitamin E oil
0.5 oz additional olive oil
kitchen scale
silicon or enamelware pots, pitchers, and bowls.  Use silicon, enamel, or wooden utensils because metal ones can chemically react with the lye. 
wooden spoons
spatula
immersion blender
rinsed cardboard milk carton

Step 2: Mix up lye solution.
I prefer to weigh out the ingredients instead of measuring them with cups.  Remember to zero or tare the scale after you put the bowl/pitcher on it.  Measure out 12 oz of filtered water.  The dissolved minerals in regular tap water will make the lye solution cloudy.  Use filtered water to avoid this. 
Measure the lye out in a separate container.  For this particular recipe, you need 7 oz of lye.  If you change the amounts or types of oil, you will need a different amount of lye.  Use a lye calculator to determine the exact amount necessary for any mixture of oils.  Wear the safety equipment while you work with the lye.  You can find lye in the plumbing supply section of your local hardware store. 
Carefully add the solid lye to the water while stirring.  This will create a lot of heat.  Don't put your head over the pitcher as you stir.  Avoid breathing the vapor that rises from the hot mixture.

Step 3: Mix up the oils.
Weigh out 15 oz of olive oil.  Remember to zero out your scale after you put the bowl on it. 
Pour the olive oil into an enamel pot.  Heat the pot on low.  If you prefer, use a crock pot on low instead of the enamel pot.  Just remember, once you use it for the chemical reaction that makes soap, you shouldn't use it for food anymore.  This will become your crafting pot/crock.  The same goes for the wooden spoon, spatula, and immersion blender.
The coconut oil might be a solid at room temperature.  If it is, heat it in the microwave for about a minute to melt it.  Then measure it out just like you did the olive oil.  Pour it into the pot with the olive oil.  The shortening is a little different.  Scoop it out as a solid to weigh it.  Then heat it in the microwave to melt it.  Finally, pour it into the pot with the coconut and olive oils.
The last oil to add, cocoa butter, is a pretty firm solid at room temperature.  Weigh out 3 oz of it, then heat it in the microwave to melt it.  This might take a few minutes.  Pour it into the pot with the rest of the oils.  They all need to be melted and well mixed before you can do the next step. 

Step 4: Prepare for the emulsion.
The oil mixture and the lye mixture both need to be at 100-110 degrees Fahrenheit before you can mix the two together.  If necessary, cool the lye mixture by adding a couple of ice cubes. 
 
While you are waiting for the perfect temperature, measure out your 'goodie' ingredients.  These are the ingredients that make the soap special: vitamin E for skin health, fragrance or essential oils, and a little extra olive oil to prevent separating. 
 Once the oil and lye are at the correct temperature, you can create the emulsion.

Step 5: Reaching trace and pouring.
Wear your safety great!  Pour the lye solution into the mixture of oils.  To create an emulsion, you will need to stir a lot.  You can stir by hand with a wooden spoon for about an hour OR you can use an immersion blender for about a minute.  Mix until you reach trace.  What is that?  Well, it's easier to show than tell.  Check out this awesome video that I did not make.  When you reach trace, quickly mix in the 'goodies'.  Then pour the mixture into the milk carton mold.  I'm using a special soap mold, but when I started, I used a milk carton.  Use a spatula to get the soap out of the pot and smooth the mixture into the mold. 
Cover the soap with plastic wrap.  I like to get the soap to the 'gel' phase, but some soap makers prefer to avoid this.  Let the soap sit for a day or two before you un-mold and cut it.  I cut it with a wavy soap cutter to get a decorate edge, but you can cut it with a knife.  The soap has to 'cure' for about three weeks before you can use it. 

Happy Saponification!


Tuesday, May 22, 2012

Using a Wool Wash Bar on Delicate Wool

This method is better for cleaning delicate merino and blue faced lancashire wools.  It is simple with fewer steps.  It will also work well for cleaning wool that isn't very dirty or for that first lanolizing on a new piece of wool.  Felting is caused by agitating the wool fibers in warm water.  Please use cool or cold water when washing your wool.  Allow it it air dry.  Avoid scrubbing with a lot of friction.  The wool wash bar used here is my own Carver Creations bar.

1) Turn the wool inside out. 
2) Rinse the wool in cold tap water.  Swish to remove the urea salts from the fibers.  Pour out the rinse water.
 3) Put an inch or two of hot water in the bottom of your wash basin.  Drop in the wool wash bar.  You need enough hot water to cover the wool wash bar.  Do not allow the hot water to get on the  wool.  Let the wool wash bar sit in the hot water for a while.  Go do something else and come back when the water is nice and cloudy.  I made smoothies for my kids while this was soaking.
4) After soaking for several minutes, remove the wool wash bar from the hot (now warm) water.  Add cold water to the hot/warm soapy water until there is enough wash water to immerse the wool.  The end wash water should feel cool or cold to the touch. 
5) Gently swish and squish your wool in this water to clean it.  Feel free to allow it to soak in the wash water for a few minutes.  If you let hand-dyed wool soak for more than 10 minutes, it will probably bleed dye into the wash water.
6) Spin out the wool in a washing machine.  This needs to be spin only, no water should be added to the machine basin or agitation by the center agitator.  Remove wool promptly after the spin cycle has completed.  Wool left in the machine may be forgotten and felted with the next load of laundry. 
7) Air dry.  Normally I lay the wool flat across the top of my drying rack, but this time the rack was too crowded.  Hanging wool may cause it to stretch.


Saturday, May 12, 2012

Using a Wool Wash Bar on Heavily Soiled Wool

This method is great for wool that is really dirty.  It's also great for wool that toddlers or heavy wetters wear.  It removes urine more effectively than swishing in liquid wool wash.  I want to add a note about felting.  Felting is caused by heat, agitation, and water.  So please, while following these steps use cool or cold water and be gentle.  Scrub lightly without using a lot of pressure.  

The woolies used in these photos are interlock from Wild Child Woolies.  The wool wash bar used is my own Carver Creations bar.  It contains lanolin and a touch of lavender essential oil to ward off the moths.

1) Examine the outside of the woolies for any soil: dirt, mud, food, poo...  Dampen the spots of filth with cool water.  Lightly scrub at the gunk with the wool wash bar.

 2) Turn the woolies inside out.  Inspect the inside of the wool.  Clean any soiled spots of the inside just like you cleaned the outside.  

3) Fill the sink or bowl with cool water.  Rinse the woolies.  Swish and swirl.  Pour out the used water.


4) Gently scrub the wetness zone with the wool wash bar.  (Don't leave the bar of soap in the bowl for step 5.)

5) Fill the bowl/sink with fresh, cool water.  Swish and swirl the wool around to dissolve the lather into the water.  The water should be nice and cloudy. At this point you can allow them to soak for 5-10 min.

6) Dump the wool into the washing machine.  Turn it onto spin only (no agitation or added water).  Spin the excess water out of the wool.  This step cuts drying time.  Make sure you remove the wool from the machine immediately after it stops spinning.  You don't want to forget about it and add laundry on top.

7) Turn the wool right side out.  Air dry.  I like to lay them flat on the top level of a drying rack.

Happy Washing

Saturday, January 21, 2012

After Bath Oil


If you are sensitive to dyes and preservatives in body care products, you might consider using an after bath oil to moisturize your skin instead of a lotion. Lotion is an emulsion of water and oil. The mixing of oil and water creates an environment ripe for bacteria. It takes preservatives to prevent unfriendly guests from invading your moisturizer. Avoid the need for preservatives by avoiding the mixture. I must warn you that any oil in the bath will make you very slippery until it absorbs into your skin, so be careful. The idea here is to use light oils that quickly absorb into skin. I measure by weighing the oils into my container, but you could measure by volume. One ounce of oil has the volume of about two tablespoons.

2.5 oz Safflower Oil
2.5 oz Extra Virgin Olive Oil (if you can find it, extra-extra virgin would be even better)
1 oz Sunflower Oil
1 oz Jojoba Oil (You can substitute apricot kernel oil or sweet almond oil or just leave the jojoba out.)
.10 oz Vitamin E Oil (Open up a few capsules of vitamin e supplements)
10 drops of your favorite essential oil (optional)

I pour the ingredients into an 8 oz bottle, put the lid on, and shake well. Apply a thin layer to your skin after you towel off. It should absorb quickly. I put it in a spray bottle, but it doesn't spray out in a fine mist, it comes out in a stream. Enjoy!

Tuesday, July 6, 2010

How to Make Your Own Liquid Laundry Soap

Need a project to use up all those little leftover pieces of soap? If you have sensitivities to fragrances or dyes you could use an unscented soap bar to make this laundry soap. It's a lot more cost effective than buying a fragrance free detergent. Just a little note though, I don't use this soap on my cloth diapers. It has a lot of borax in it and I'm concerned that it will harm the elastic.

laundry soap step 4
Ingredients:
about 5 ounces of soap
1/4 cup Dawn dish-washing detergent
1 cup borax
1 cup washing soda
hot water
fragrance or essential oil of your choice, optional

Equipment:
2 quart covered saucepan
old liquid laundry detergent bottle
2 funnels

Directions:
1) You will need about 5 ounces of soap pieces. I leave this pan sitting out on the stove top and collect little pieces of soap until I have about 5 ounces. You could also grate up a larger piece of soap or a whole bar using a cheese grater. If I plan to use this laundry soap on whites, I make sure I'm using white or very lightly colored pieces of soap. I don't want to dye my husband's white dress shirts lavender with my laundry soap.
Laundry Soap Making Set 1
2) Completely cover the soap pieces with water. More water makes this process go faster but too much water and heat can make your soap bubble up into a foamy mixture.
Laundry Soap Making step 2
3) Cover the pan and heat on low for 1-2 hours until all the soap pieces are completely dissolved. I usually check on it every 15 min. or so just to make sure it hasn't bubbled over.
Laundry Soap Making Step 3
4) When the soap is dissolved, pour the hot mixture into the laundry detergent bottle. I find a funnel very helpful.
Laundry Soap Step 5
5) Add 1/4 cup Dawn dish-washing liquid to the soap in the bottle. Normally I would use Original Dawn, but all I had on hand at the time was Ultra Dawn. I add the Dawn because my handmade soap contains moisturizing oils for my skin. My clothes do not need moisturizing so the Dawn helps to trap those extra oils.
6) I use a different funnel (that I made out of a piece of paper) for the dry ingredients. Pour 1 cup of borax and 1 cup of washing soda into the laundry detergent bottle.
Laundry soap step 6
7) Fill the bottle up with hot water from the tap. Using hot water is important to help the borax dissolve. Put the lid on and give it a good shake after filling to help in cooperate all ingredients. If I were going to add a fragrance or essential oil, I would do it here at the end. I think 1/2 ounce would be a good starting point to experiment with scent amounts.
8) I use 1/4-1/2 cup of this soap in my wash loads. I do give the bottle a little shake before every use just in case there are some undissolved ingredients.

Sunday, April 11, 2010

My Boozy Bubbly Shampoo Bar Experience

In celebration of curly girls everywhere, I'm trying to concoct the perfect curly girl shampoo bar. Here's my first attempt!

The night before:
1) First I took 2 bottles of beer (Budweiser, that Toby's favorite brand) and simmered it on low heat until it was only 4 ounces in volume.
Photobucket

2) Then I put 2 Tablespoons of dried rosemary into a little coffee filter bag and steeped it in 1.5 cups of hot filtered water. I let this sit in the fridge overnight before I removed the rosemary tea bag.

Photobucket

The big day:

3) I mixed the lye into the rosemary tea. I like to do this outside to keep the lye fumes away from my family. Of course I wore gloves and goggles while working with the lye solution.

4) I measured out the oils and melted in a crock pot on low. I like to soften the solid at room temperature oils in the microwave for about a minute to reduce the time it takes the crock pot to melt everything.

5) When oils were melted, I blended the lye into the oils to reach a light trace.

6) At light trace I blended in the beer, Castor oil, vitamin E, and honey.

7) I made sure that the crock pot is on low and cooked the soap with the lid on the pot for about 30 minuets. What did I do during this time? I cleaned the kitchen, prepared my molds, and crocheted.
Photobucket

8) After 30 min had passed, the soap was gelling. I stirred in the un-jelled raw soap and continued heating it.


9) I checked on the soap in 10 min. intervals until the soap had completely gelled (about 1 hour total time). Then I gave it the icky licky test. (Scoop out a marble size blob of soap. Allow it to cool. Roll it in your palm to create a ball. Give it a little lick. If you get a zap, then continue to cook and check it at 5 min intervals.)

10) At this point I needed to mix in the fragrance oil and vinegar. I started to wonder if I had over cooked the soap because it was so stiff that I had to have Toby mix in the fragrance and vinegar.

11) I spooned the soap into the molds. For this batch I used silicon muffin molds. I let it cool and set up overnight. When I un-molded it in the morning I was disappointed. Most of the bars looked really lumpy. So, what did I decide to do? REBATCH I think I could avoid this in the future if I cooked it less. I fear I let it dry out a little too much.
Photobucket

The next day:

12) Greg and I used the cheese grater to break the soap into little pieces.

13) We heaped those pieces back into the crock-pot and poured 1/4 cup water onto them.
Photobucket

14) With the lid on the pot and the pot on low, I heated the soap until it had all melted. I stirred it occasionally just to check the consistency.


15) When the soap was nice and smooth, I poured it into a new mold. This time I used a rectangular Rubbermaid container. I know it looks like bar cookies, but don't eat it!
Photobucket

16) The next day I released the soap from it's mold and cut it into rectangular bars. I was really pleased at how much smoother the rebatched soap appeared. I did let this soap cure for 3 weeks before using because it had a lot of water to lose.


I love this soap! It seems to enhance the curl in my hair. I think it might be a little heavy for someone with fine hair, but for my dry, curly hair it works great!
Photobucket

Want the recipe?


2 ounces cocoa butter
6 ounces Coconut Oil
14 ounces Olive Oil
12 ounces Crisco Oil
14 ounces Sunflower Oil
12 ounces rosemary tea
6.45 ounces lye
4 ounces reduced beer
1.5 ounces castor oil
2 ounces honey
6 grams vitamin E
0.4 ounces Oatmeal, Milk, and Honey Fragrance Oil
3 oz vinegar

Wednesday, March 17, 2010

Scented or Unscented… why not both?

Some people love fragrance oils and some people prefer a more natural option. I made a 6 pound batch of oatmeal, milk, and honey soap to please both. I was a little shy about using milk, so I used more water than buttermilk for this attempt.

Ingredients
30 oz canola
30 oz shortening (Crisco)
30 oz coconut
6 oz olive oil
13.8 oz lye
24 oz water
1 Tablespoon un-iodized salt
1 cup buttermilk
4 oz oatmeal
2 oz honey
2 oz rice bran oil
8 grams vitamin E
1 oz oatmeal, milk, and honey fragrance oil

First I dissolved the salt into the water. Then I mixed the lye into the water. I weighed out the canola, shortening, coconut, and olive oils and put them in a large enamel pot on the stove on low heat. While the lye solution cooled and the oils melted, I ground the oatmeal into a fine powder with a coffee bean grinder. I mixed the rice bran oil, vitamin E, oatmeal, honey, and buttermilk in a small bowl. When the lye solution and the oils were both at about 110 degrees, I mixed them together with a stick blender. When the soap was almost to trace, I blended in the buttermilk mixture. I poured about 2 pounds of this soap into a 6 cavity silicon muffin pan, creating 5 ounce bars of unscented soap. Then I blended the fragrance oil into the remaining 4 pounds of soap in the enamel pot. I poured the scented soap into a loaf mold, creating 4.5 ounce bars of scented soap. I sprinkled oatmeal on top of both bars for a decorative touch. Best of both worlds! I got 6 unscented bars and 15 scented bars.

Photobucket

Saturday, January 30, 2010

The Soap Saga

I have sensitive skin. My skin gets dry in the winter. I break out in little spots of exema, especially when I use a soap with irritating dyes, fragrances, and perspectives. My husband gets a headache from strong fragrances. My mother-in-law is even more sensitive than my husband and I put together! I switched to natural or homemade soap about a year ago to reduce our discomfort. After 6 months of buy other people's soap, I thought about making my own. Then I could tweak the ingredients list to our families particular needs. I did instruct students in hot process soap making while I taught high school Chemistry. Early Dec of last year, I made my first batch of cold processed. It was a disaster! But my second batch turned out pretty good. I found that I loved it so much, I had to limit myself to one batch of soap a week!

Lightly Lavender soap

A few notes on homemade soap...

Types of Homemade Soap
Homemade soap falls into one of three categories: cold processed, hot processed, and rebatched. Cold processed soap is formed by pouring the 'raw' soap into molds. It tends to be smoother in texture than the other kinds of soap and last longer. It also takes longer to cure. When hot processed soap is formed, extra heat is added to the 'raw' soap. The texture is less smooth but the soap takes less time to cure. Rebatched soap is produced when previously made soap is melted down, often to add fragrance or herbs. Rebatching is a great way to add delicate herbs, but it adds additional time to the soap making process.

What is Superfatting?
The process of making soap, called soapfonication, mixes oils with lye and water to create the soap molecule. Sometimes extra oils are added, called superfatting. These extra oils allow the soap to be more moisturizing but they also decrease the lather of the soap and it's shelf life. It also makes the soap softer. Vitamin E can be added to extend the shelf life of the soap and enrich the skin. The extra oils often feel like a 'film' on the skin. They often absorb. A person with dry skin can benefit from a soap that is superfatted. Superfatting is expressed as a percentage; lower percent means less moisturizing oils, higher percent means more moisturizing oils.

Sensitive Skin
People with sensitive skin often benefit from homemade soap. Homemade soap is usually made without the preservatives that cause irritation. For people with very sensitive skin, homemade soap can also be made with dyes and fragrances. The addition of oatmeal and honey into soap also seems to sooth sensitive skin. Children and babies usually do well with unscented soap. Please keep in mind, homemade soap does not contain the numbing agents that are added to commercially available baby soap, so please keep homemade soap out of eyes.

Keep it Dry
Homemade soap can become soft and sticky if it's allowed to sit in water. After using soap, place it on a dry wash cloth or a special soap deck to allow it to dry between uses. This will extend the life of the bar. I put our hand soap on a dry face scrubby to keep it from getting stuck to the counter. Of course, I change the face scrubbie at least once a week to reduce the chance of bacteria growing in the scrubbie.

Antibacterial Properties
Soap, when used properly, has natural antibacterial properties. When you wash your hands, sing the alphabet song while you lather to ensure you've washed long enough to kill germs. Soap makers can add tea tree oil to natural soap to increase it's antibacterial properties. Tea Tree Oil soap is a great alternative to commercially produced antibacterial soap that is often harsh and drying.

Exfoliation
Soap makers will occasionally add exfoliating agents to soap. Cocoa powder, coffee grounds, oatmeal are all natural and gentle ways to remove dead skin. If you suffer from 'chicken skin' or patches of rough skin, try out an exfoliating bar.

Honey and Oats Soap